
Most plumbing work comes from customers you have already done work for. A follow-up after a maintenance job is one of the easiest ways to bring them back. It also helps you pick up problems before they turn into emergency call-outs. This guide gives you a simple checklist you can use with a notebook, a spreadsheet or any job system. You do not need special software to start.
1Why follow-ups matter for maintenance work
A maintenance visit is often short. A tap washer, a hot water service check or a blocked drain can be finished in an hour. The customer may not think about you again until something goes wrong at 7pm on a Sunday.
A planned follow-up changes that. You contact the customer while the job is still fresh. You check that everything is working. You let them know what else might need attention. Done well, this builds trust and gives you a reason to quote the next job.
If you want more background on turning past customers into regular work, read repeat customers for tradies.
2Step 1: Check the job record before you contact the customer
Before you send anything, pull up the job. You want the facts in front of you, not a memory of what happened last Tuesday.
Confirm these details first:
- What work was done, and which parts or fittings were used
- Any warranty on the work or parts, and when it expires
- Share only care instructions that are appropriate for the equipment and work. Follow manufacturer guidance and the applicable trade standards.
- Any items you noted but did not fix, such as a weeping valve or a slow drain
- Whether the customer signed off on the work
- The date of the next service or check, if one applies
3Step 2: Run the follow-up checklist
Work through this list for each completed maintenance job. Tick each item off as you go. If you cannot tick one, note it and decide what to do next.
- Send a short thank-you within 24 hours. Mention the job by name, for example 'the hot water service check at your place on Tuesday'.
- Confirm the work is holding. Ask whether the tap is still dripping, the drain is still clear or the water pressure is steady.
- Share only care instructions that are appropriate for the equipment and work. Follow manufacturer guidance and the applicable trade standards.
- Offer to quote any recommended work you noted during the visit. Keep it specific and optional.
- Record the outcome in the customer's notes, including any reply or missed contact.
- Set a reminder for the next check, if the job needs one.
- If the customer has not replied after a week, send one polite follow-up. Then stop unless they ask you to continue.
4Step 3: Use simple, honest wording
Customers respond well to short messages that say what you did and what you suggest. Avoid pressure. You are offering a service, not chasing a sale.
Example message (adjust to suit your business):
Hi Sam, it's Dave from Riverside Plumbing. Just checking the kitchen tap is still running well after Tuesday's washer replacement. If you notice any drips or changes, text me on this number. I also noted the old flexi hose under the sink looks due for replacement. Happy to quote that if you'd like.
5Step 4: Plan the timing
Different jobs need different follow-up timing. This example schedule is a starting point, not a rule. Change it to suit your trade and the work you do:
- Within 24 hours: thank-you and confirmation the job is complete
- About two weeks: check the repair is holding
- About six months: reminder for a seasonal check, such as a hot water service or outdoor tap inspection
- Once a year: general maintenance check offer for regular customers
6Step 5: Keep it all in one place
The checklist only works if you can find the job, notes and customer history quickly. If your records are spread across a notebook, texts and a phone calendar, follow-ups can be missed.
WattlePing keeps enquiries, customers, jobs, quotes and invoices together, with notes and history tied to customer records. See enquiries and customers and plumbing software.
7Common mistakes to avoid
These are the errors that most often stop maintenance follow-ups from paying off:
- Waiting until the customer calls you back before following up at all
- Sending generic messages that do not mention the job
- Quoting extra work without explaining why it matters
- Forgetting to record what was said, so the next visit starts from scratch
- Continuing to chase a customer who has clearly said no
- Leaving quote follow-ups unanswered. For tips on those, see quote follow-up messages
Questions
How soon should I follow up after a plumbing maintenance job?
Send a short thank-you within 24 hours. Then check in about two weeks to make sure the work is holding. The right timing depends on the job, so adjust as needed.
What should a maintenance follow-up message include?
Name the job and the date, confirm the work is holding, mention any warranty or care tips, and offer to quote any extra work you noted. Keep it short and give the customer an easy way to reply.
Can software send follow-ups for me?
You can use reminders and a consistent process to keep follow-ups from being missed. WattlePing keeps enquiries, customers, jobs, quotes and invoices together; check the current follow-up tools to see which messages can be automated in your account.
How many follow-ups is too many?
One polite follow-up after no reply is reasonable. If the customer still does not respond, stop and leave the door open. Note the outcome in their record so you do not repeat the same message.
Do I need special software to use this checklist?
No. You can use a notebook or spreadsheet. Software helps when you have many customers and want the job history, notes and follow-up tasks in one place.
Go deeper with a guide
More from the resource library
More: all resources · guides for tradies · free tools · trades we set up for · WattlePing features · pricing.